Archive for the 'Thermostat' Category

Why would the fan on an outside airconditioning unit not run when the thermostat is turned on

Tuesday, July 8th, 2008

Question:
I can hear the compressor come on but the fan does not work. Is there a reset button or something? Help!

Reply:
Depends where you live.
If you live in a part of the world where it is winter right now the A/C could be just in the start up phase where it builds up heat first before supplying the needed heat indoors…normal operation for reverse cycle (heat pump) units.
If you are in America right now you are in summer and this could indicate a problem.
If the latter, you will need specialist help. It’s no good explaining what the problem could be, just call an A/C technician to fix your machine as soon as possible, not because of danger but because at this time of year you might be on a long waiting list.

Fedders X Chassis A3X05F2B 19 Room Air Conditioner w/ 5200 Cooling BTU, 115

Wednesday, October 3rd, 2007

The Fedders A3X05F2B air conditioner is a great and affordable model that uses 5200 BTUs. It features an adjustable thermostat and a slide out filter with…

Originally posted here:
Fedders X Chassis A3X05F2B 19 Room Air Conditioner w/ 5200 Cooling BTU, 115

How do you know if your thermostat is working properly?

Monday, August 6th, 2007

Question:
My AC unit is blowing cool air, but my room temperature is not getting cooler… The blower seems to be working fine, however there is some condensation on the cooper line inside the house.

Reply:
Your thermostat is working properly if it cycles the machine off and on around 1-2 degrees of the set point.
As stated earlier, measure the temperature at the thermostat with another thermometer, if the set point and the thermometer match to within approx 2 degrees your thermostat is working fine. If not then further investigation is necessary.
It could be that the machine cannot handle the heat load and the thermostat never gets a chance to cycle the machine off, keep this in mind before condemning the t/stat.
After all I’ve said so far it is probably likely that the A/C unit is struggling with the heat load but the only way to find out is to call a reputable and experienced /qualified technician and get them to check it out. At least then you will know one way or another.

Our thermostat went blank after a blackout

Sunday, August 5th, 2007

Our thermostat went blank after a blackout, we called the heating company to come out and take a look?

Question:
They charged us for the service call as well as the installation of a new thermostat..we paid a total of 300 bucks. we had ice cold air for 1 whole day before the new one went blank…what gives? we are having the heating and air company come out again which is 3days later..is it fair for us to have to pay another service fee. Just our luck..homeowners warranty for appliances is lapsed.

Reply:
You will be required to pay for any parts that eventually fix this problem, but, you should not be charged for any new parts they install that were not the cause.
Some leeway here, troubleshooting a modern A/C colling/heating system is not always easy as there literally are hundreds of things that can go wrong and the causes are not easy to track down sometimes.
Having said that, keep an eye on the situation and do not allow yourself to be charged for a part that was not the cause of the breakdown. Keep in mind that there are more than one part that can go down at the same time.
The service company should not be charging you for a return visit if they claimed to have fixed it the first time.